Pumpkin is the flavor cottage cheese was waiting for. The faint tang that some people fight in a vanilla base is exactly what makes pumpkin taste like pie instead of like squash — it does the same job the cream cheese does in a pumpkin cheesecake, without the calories.

Pumpkin cottage cheese ice cream made in the Ninja Creami, scooped into a bowl
Save This Recipe Form

Want to save this recipe?

Enter your email below & I will send it straight to your inbox. Plus you’ll get more great recipes from me on occasion!

It’s also the flavor most likely to come out watery if you follow a standard cottage cheese ratio, because canned pumpkin is mostly water and nobody adjusts for it. This recipe does.

If you want the fuller, richer, cream-cheese version, that’s my Ninja Creami pumpkin cheesecake ice cream. This one is the lighter, higher-protein take.

Why cottage cheese works so well with pumpkin

Three reasons this pairing outperforms most cottage cheese flavors:

The tang reads as cheesecake. Frozen pumpkin desserts want a little acidity or they taste flat and vegetal. Cottage cheese supplies it for free.

Pumpkin is thick. Purée has real body, which means the base holds together through the spin better than a fruit-based one that’s mostly juice.

Warm spice covers everything. Cinnamon, ginger, clove, and nutmeg are assertive enough to bury any dairy note completely. If you’ve had a cottage cheese pint taste faintly cheesy, this is the flavor least likely to do it.

Ingredients

Makes one 16oz Creami pint, about two servings.

Cottage cheese, canned pumpkin purée, maple syrup and pumpkin pie spice in bowls
  • Full-Fat (4%) Cottage Cheese: The entire protein base and the reason this pint is creamy instead of icy. Fat coats the ice crystals and keeps them from clumping into shards, so this is the one ingredient not to lighten. Buy it fresh and buy a mild brand — cottage cheese gets tangier as it ages, and freezing does nothing to hide sourness.
  • Canned Pumpkin Purée: Brings the flavor, the color, and a surprising amount of body. Make sure the label says 100% pumpkin. Pumpkin pie filling is a different product — already sweetened and spiced, and thinner — and using it means guessing at how much sugar is already in your base.
  • Whole Milk: Thins the base enough for the machine to spin it smoothly. Note the quantity is smaller than in most cottage cheese recipes, and that’s deliberate: pumpkin purée is roughly 90% water, so it’s doing most of the liquid’s job already.
  • Maple Syrup: Sweetens and, just as importantly, lowers the freezing point so the pint never sets rock-hard. The caramel notes also play better with warm spice than plain white sugar does.
  • Instant Vanilla Pudding Mix: The stabilizer, and the single biggest texture upgrade in the whole recipe. The modified starch traps free water so it can’t form large ice crystals. One tablespoon is plenty — more and it starts tasting like pudding.
  • Pumpkin Pie Spice: Carries the entire flavor identity. Freezing badly mutes aromatics, so this recipe uses more than you’d expect. A fresh blend makes a real difference here — my homemade pumpkin pie spice tastes noticeably brighter than a jar that’s been in the cabinet since last October.
  • Vanilla Extract: Rounds out the spice and softens any dairy note from the cottage cheese. Small amount, real job.
  • Salt: Does nothing for texture and everything for flavor. Without it the whole pint tastes flat and vaguely vegetal. Don’t skip it.

Substitutions and Variations

  • Cottage cheese: 2% works if you add a tablespoon of heavy cream back. Skip fat-free — it produces an icy pint no matter what else you do.
  • Milk: Ultra-filtered milk pushes the protein higher. Almond, oat, or coconut milk all work, though the lower fat means a slightly less creamy result.
  • Maple syrup: Brown sugar gives a deeper molasses note. Honey works. For sugar-free, use allulose — not erythritol, which doesn’t lower the freezing point and leaves the pint hard.
  • Pudding mix: Cheesecake pudding mix leans the flavor toward pumpkin cheesecake. Butterscotch is excellent here. To skip it entirely, use a scant 1/8 teaspoon of xanthan gum instead.
  • Pumpkin pie spice: No blend on hand? Use cinnamon plus a pinch each of ginger, nutmeg, and cloves.
  • Fresh roasted pumpkin: Works, but it’s usually wetter than canned. Drain it well and cut the milk back further.
  • Extra protein: A scoop of vanilla protein powder pushes this past 50g per pint. Reduce the milk to 1/4 cup if you add one.
  • Pumpkin spice latte version: Replace the milk with cooled espresso.
  • Dairy-free: Not possible with cottage cheese as the base — for a dairy-free pumpkin pint, start from a coconut milk base instead.

How to Make Pumpkin Cottage Cheese Ice Cream

Cottage cheese, pumpkin purée and spices blended into a smooth orange base

Step One: Blend the base. Add the cottage cheese, pumpkin purée, milk, maple syrup, pudding mix, pumpkin pie spice, vanilla, and salt to a blender. Blend on high for 30 to 45 seconds. This base needs more blending than most because you’re breaking down two things at once — the cottage cheese curds and the fibrous strands in the pumpkin. You’re looking for a uniform orange with no white flecks and no visible pumpkin strings, about the thickness of a smoothie. If you can still see specks of cottage cheese, keep going. That’s the difference between creamy and gritty, and it can’t be fixed later.

Spoon tasting the pumpkin cottage cheese base before freezing

Step Two: Taste it before it goes anywhere. This is the step most people skip and the one that decides whether the pint is good. Freezing mutes both sweetness and spice, so the base should taste slightly too sweet and noticeably too spiced right now. If it tastes balanced at room temperature, it’ll taste flat frozen. Adjust before you commit.

Pumpkin base poured into a Ninja Creami pint up to the max fill line

Step Three: Fill the pint. Pour the base into an empty Creami pint, stopping at the MAX FILL line — never above it. Let it sit for two or three minutes so the foam from blending settles, then wipe the rim and seal the lid.

Step Four: Freeze for a full 24 hours. Set the pint on a flat, level shelf. Both parts matter: twelve hours isn’t enough, and a slanted shelf gives you a slanted frozen surface that throws off the blade. If the top domes or freezes at an angle, level it with a hot spoon before spinning.

Frozen pint locked into the Ninja Creami set to Lite Ice Cream

Step Five: Spin it. Take the lid off, seat the pint in the outer bowl, lock it into the machine, and run Lite Ice Cream — or CreamiFit if you have the Swirl. The cycle takes about two minutes.

Step Six: Re-spin. The first spin will look crumbly and powdery, like packed snow. That’s normal and doesn’t mean anything went wrong. Dig a small well in the center with a spoon, add one tablespoon of milk into it, and run Re-spin. Most pumpkin pints need two passes because of the fiber in the purée — if it’s still not smooth, add another tablespoon and run it once more. A third pass won’t hurt it.

Step Seven: Add mix-ins. Make a well in the center, drop in your gingersnaps or pecans, and run the Mix-In program. Always last, after the texture is already right.

Step Eight: Serve or store. It’s best right out of the machine, when it’s soft-serve texture. To save half for later, level the surface, put the lid back on, and re-spin with a splash of milk before serving.

Full detail on any of these steps is in my complete guide to cottage cheese ice cream in the Ninja Creami.

Soft-serve texture pumpkin cottage cheese ice cream fresh from the machine

Tips

Overspice it. Freezing mutes aromatics badly. A base that smells correctly spiced at room temperature will taste underspiced frozen. A teaspoon and a half sounds like a lot; it isn’t.

Oversweeten it slightly too, for the same reason. Taste the base before freezing and aim for a hair sweeter than you’d actually want.

Canned pumpkin isn’t consistent. Libby’s runs noticeably thicker than most store brands. If yours looks loose in the can, pull the milk back to a quarter cup.

Maple syrup counts as liquid. If you swap to brown sugar or allulose, add a tablespoon of milk back.

Use the leftover purée. Half a cup uses a third of a can. Freeze the rest in an ice cube tray and you’ve got portioned pumpkin ready for the next two pints.

Mix-ins that work

Added on the Mix-In program after the texture is right:

  • Crushed gingersnaps or graham crackers
  • Toasted pecans
  • White chocolate chips
  • A swirl of cream cheese frosting
  • Crumbled pumpkin bread

Gingersnaps are the one I’d pick. The snap goes soft in the freezer overnight, so add them right before serving rather than storing them in the pint.

Pumpkin cottage cheese ice cream made in the Ninja Creami, scooped into a bowl

Troubleshooting

ProblemCauseFix
Icy or wateryToo much liquid for the pumpkin contentCut milk to 1/4 cup next time
GrainyUnder-blended curds or pumpkin fiberBlend 30+ seconds
Tastes flat or vegetalUnderspiced, or spice lost to freezingIncrease to 2 tsp, add more salt
Tastes too sweetUsed pumpkin pie filling instead of puréeSwap to 100% purée
Still crumbly after two spinsNormal for high-fiber basesOne more tablespoon of milk, one more Re-spin
Hard after storingRe-froze after spinningLevel the top and Re-spin with a splash of milk
Scoop of high-protein pumpkin cottage cheese ice cream in a small dish

FAQ

Can you taste the cottage cheese? No. Pumpkin pie spice is the most effective flavor cover of any Creami base I’ve made. If anything comes through, it reads as cheesecake.

Can I use fresh roasted pumpkin? Yes, but it’s usually wetter than canned. Drain it well or cut the milk further.

Do I need protein powder? No. This is 32g per pint from the cottage cheese alone. A scoop of vanilla protein pushes it past 50g if you want it — reduce the milk to a quarter cup if you add one. See my notes on which protein powders go icy first.

Can I make it sugar-free? Use allulose, not erythritol. Allulose lowers the freezing point the way sugar does; erythritol doesn’t, and the pint comes out rock-hard.

Which Creami model do I need? Any of them. Lite Ice Cream on the Original and Deluxe, CreamiFit on the Swirl. Multiply everything by 1.5 for the Deluxe’s 24oz pint.

Can I make this without a Creami? Freeze the blended base in a shallow container and re-blend it in a food processor once solid. Closer to soft serve than scoopable.

How long does it keep? Weeks in the freezer. Re-spin with a splash of milk before serving the second half.

More Ninja Creami recipes

Pumpkin cottage cheese ice cream made in the Ninja Creami, scooped into a bowl

Pumpkin Cottage Cheese Ice Cream (Ninja Creami)

No ratings yet
Prep Time: 5 minutes
Cook Time: 5 minutes
1 day
Total Time: 1 day 10 minutes
Servings: 2 Servings

Description

High-protein pumpkin cottage cheese ice cream made in the Ninja Creami. 32g protein per pint, no protein powder, and it tastes like frozen pumpkin pie filling.

Ingredients 

  • 1 cup cottage cheese, 4%, full fat
  • ½ cup canned pumpkin purée, 100% pumpkin, not pie filling
  • cup whole milk
  • 3 tablespoons maple syrup
  • 1 tablespoon instant vanilla pudding mix
  • teaspoons pumpkin pie spice
  • 1 teaspoon vanilla extract
  • teaspoon salt
  • 2 tablespoons gingersnaps, crushed, optional
  • 2 tablespoons pecans, chopped toasted, optional

Instructions

  • Add the cottage cheese, pumpkin purée, milk, maple syrup, pudding mix, pumpkin pie spice, vanilla, and salt to a blender. Blend on high for 30 to 45 seconds, until the base is a uniform orange with no white flecks and no visible pumpkin strands.
  • Taste the base. It should taste slightly too sweet and noticeably too spiced — freezing mutes both. Adjust now.
  • Pour into an empty Ninja Creami pint, stopping at the MAX FILL line. Let the foam settle for 2 to 3 minutes, wipe the rim, and seal the lid.
  • Freeze for a full 24 hours on a flat, level shelf.
  • Remove the lid, seat the pint in the outer bowl, lock it into the machine, and run Lite Ice Cream (or CreamiFit on the Swirl).
  • The first spin will look crumbly. Dig a small well in the center, add 1 tablespoon of milk, and run Re-spin. Repeat once more if it isn’t smooth — most pumpkin pints need two passes.
  • For mix-ins, make a well in the center, add them, and run the Mix-In program.
  • Serve immediately for soft-serve texture. To store, level the surface, replace the lid, and re-spin with a splash of milk before serving the rest.

Equipment

  • Ninja Creami (Original, Deluxe, or Swirl)
  • Ninja Creami pint container with storage lid
  • Blender, food processor, or immersion blender
  • Measuring Cups and Spoons
  • Rubber spatula — for scraping the base out of the blender
  • Spoon — for digging the well before the re-spin

Notes

  • Use 100% pumpkin purée, not pumpkin pie filling. Pie filling is pre-sweetened and thinner, which throws off both the sugar and the liquid.
  • The milk is intentionally low. Canned pumpkin is roughly 90% water and does most of the liquid’s work. Adding more gives you a pint of pumpkin-flavored ice.
  • Canned pumpkin varies. If yours looks loose in the can, cut the milk to ¼ cup.
  • Sugar-free: substitute allulose for the maple syrup, not erythritol — erythritol doesn’t lower the freezing point and the pint sets rock-hard. Add 1 tablespoon of milk back to replace the lost liquid.
  • Deluxe owners: multiply everything by 1.5 for the 24oz pint. Freeze time stays at 24 hours.
  • A crumbly first spin is normal and not a sign of failure.

Nutrition

Serving: 1ServingCalories: 399kcalCarbohydrates: 52gProtein: 16gFat: 15gSaturated Fat: 4gPolyunsaturated Fat: 3gMonounsaturated Fat: 6gCholesterol: 23mgSodium: 627mgPotassium: 470mgFiber: 3gSugar: 34gVitamin A: 9755IUVitamin C: 3mgCalcium: 215mgIron: 2mg

Share this recipe

We can’t wait to see what you’ve made! Mention @forktospoon or tag #forktospoon!